By embedding lead in the shell, people achieve reliable protection against radiation. As an experienced manufacturer of medical airtight doors and radiation-tight doors, Moenke believes that lead inserts must have a certain thickness depending on the radiation intensity. This thickness is decisive for the degree of damping of the radiation protection door, the so-called lead equivalent. With the radiation protection doors from Moencor, you can choose between different millimeter lead equivalents.

The Lead Door also called lead plate door. The Lead Door is divided into: pivoting lead door, sliding lead door, rotating lead door, locking lead door and combination lead door.

Open the lead door horizontally

Mainly used in places with low radiation intensity and airtight requirements, generally for personnel entrance and exit passages. Such places generally have small shielding layer thickness, small duct size and high airtightness requirements. The opening method can generally be opened manually.

Push-pull lead door

It is mainly used where the radiation intensity is relatively high and there are no air tightness requirements. It is generally suitable for pedestrian passages or the outside doors of special logistics passages. The outer space of the duct is large, the thickness of the shielding layer is relatively large, the size of the duct is large, and there is no airtightness requirement. The opening method can usually be opened manually or electrically.

Lead revolving door

Radiation protection revolving doors are generally used in places with high radiation intensity and small external fields, and are generally used as protection in radiation emission equipment. This place has high dose levels and little space, which is not suitable for installing sliding and flat radiation protection doors.

Plug in the lead door

The pluggable radiation protection door has a very strong protective effect, which can usually achieve a shielding layer…